FujiFilm Frontier DE100 Скачать руководство пользователя страница 186

Страница: 186 / 188

8-8

- Frontier DE100 Operation Guide -

Open Source Software

8.5 Open Source Software

8.5.1 OpenCV

Redistribution and use in source and binary forms, with or without modification, are permitted

provided that the following conditions are met:

•

Redistributions of source code must retain the above copyright notice, this list of conditions and

the following disclaimer.

•

Redistributions in binary form must reproduce the above copyright notice, this list of conditions

and the following disclaimer in the documentation and/or other materials provided with the

distribution.

•

Neither the names of the copyright holders nor the names of the contributors may be used

to endorse or promote products derived from this software without specific prior written

permission.

This software is provided by the copyright holders and contributors “as is” and any express or

implied warranties, including, but not limited to, the implied warranties of merchantability and

fitness for a particular purpose are disclaimed. In no event shall copyright holders or contributors

be liable for any direct, indirect, incidental, special, exemplary, or consequential damages

(including, but not limited to, procurement of substitute goods or services; loss of use, data,

or profits; or business interruption) however caused and on any theory of liability, whether in

contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use

of this software, even if advised of the possibility of such damage.

Содержание Frontier DE100





























































































































































































Результаты поиска

Содержание Frontier DE100

Отзывы:

FujiFilm Frontier DE100, Руководство по эксплуатации, Страница: 186 / 188

Результаты поиска

Содержание Frontier DE100

Отзывы: