FujiFilm Frontier DE100 Скачать руководство пользователя страница 154

Страница: 154 / 188

7-8

- Frontier DE100 Operation Guide -

When an Error Occurs

7.1.2.3 Error

Error ID

Message

E-012E

Detected plate heater assembly abnormality.

Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.

E-012F

Detected plate heater assembly abnormality.

Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.

E-0130

Detected hot air heater assembly abnormality.
Restart the printer.

E-013C

Detected hot air heater assembly abnormality.

Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.

E-013D

Detected hot air heater assembly abnormality.

Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.

E-0140

Detected plate heater assembly abnormality.
Restart the printer.

E-0142

Detected plate heater assembly abnormality.

Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.

E-0144

Detected hot air heater assembly abnormality.
Restart the printer.

E-0146

Detected hot air heater assembly abnormality.

Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.

E-0152

Temperature is outside operating range (low temperature).

Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.

E-0153

Temperature is outside operating range (high temperature).

Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.

E-0205

Reached the carriage assembly replacing time.
Contact service support.

E-0238

Detected PF motor abnormality.
Restart the printer.

E-0239

Detected roll motor abnormality.
Restart the printer.

E-0248

Detected PF motor abnormality.
Restart the printer.

E-030C

Reached the waste ink bottle replacing time.
Contact service support.

E-030E

Reached the waste ink tank replacing time.
Contact service support.

E-0310

Reached the flushing box replacing time.

Contact service support.

E-0325

Detected MC board abnormality.
Turn off the printer and disconnect/reconnect the printer power cable, and then restart the printer.

E-0326

Detected MC board abnormality.
Turn off the printer and disconnect/reconnect the printer power cable, and then restart the printer.

E-0329

Detected MC board firmware abnormality.

Turn off the printer and disconnect/reconnect the printer power cable, and then restart the printer and PC.
Execute Firmware Update from the maintenance tool.

E-032A

Detected MC board abnormality.
Turn off the printer and disconnect/reconnect the printer power cable, and then restart the printer and PC.

E-032B

Detected MC board abnormality.
Turn off the printer and disconnect/reconnect the printer power cable, and then restart the printer and PC.

E-0331

Detected platen vacuum fan abnormality.
Restart the printer.

Содержание Frontier DE100





























































































































































































Результаты поиска

Содержание Frontier DE100

Отзывы:

FujiFilm Frontier DE100, Руководство по эксплуатации, Страница: 154 / 188

Результаты поиска

Содержание Frontier DE100

Отзывы: