manualshive.com logo in svg

FujiFilm Frontier DE100, Руководство по эксплуатации, Страница: 45 / 188

Поделиться
Скачать
FujiFilm Frontier DE100 Скачать руководство пользователя страница 45

- Frontier DE100 Operation Guide -

2-15

Notification Message

2

Printer Driver

2.4  Notification Message

In the Notification Message, you can check the printer’s state including ink and paper remaining, 

as well as change the printer preferences.

2.4.1  Notification Message Display Method

2.4.1.1  Notification Message Display Method (Windows)

You can display the Notification Message using any of the following methods.

• 

Click the [Display Printer Status] button on the “FUJIFILM DE100 Printing Preferences” screen.

• 

Double-click the “FUJIFILM DE100” icon on the Taskbar.

• 

Click [Printer Information] in the right-click menu of the “FUJIFILM DE100” icon on the Taskbar.

Important:

When multiple printers are connected, the same number of icons appear on the Taskbar.

The Notification Message also appears automatically when an error occurs in the printer.

You can also set the notifiable error levels in the Notification Message.

See 

$

 

“7.1.1.1 Setting the Notifiable Error Levels” (Page 7-3)

 for more details.

Содержание Frontier DE100





























































































































































































Отзывы:

Нет отзывов