FTS LT1-CELL-VZ, Руководство оператора

Страница: 15 / 66

700- LT1-Man Rev 8 09 Feb 2021 Page 9/60
2.2 USING FTS360 AND THE FTS360 CONFIG APP
This section provides basic information on using the FTS360 Config App for the initial setup of an
LT1. For a detailed description of the operation of FTS360 refer to the “FTS360 User Manual” (700-
FTS360-Man). Details of configuring an LT1 with the FTS360 Config App are found in Chapters 5 and
6.
2.2.1 FTS 360 ACCOUNT INITIALIZATION
In order for Agency users to have access to FTS360, the Administrator must first initialize the
account and assign an Agency name. Note that in some cases, FTS will have completed this step on
behalf of the client. If that is the case, the Administrator will not have to Sign Up as outlined in the
following paragraph. Instead, an e-mail will be sent to the Administrator with directions on how to
log in to FTS360. The Administrator must then create user accounts for the Agency.
To create the Agency, the Administrator must go to the Sign Up URL https://360.ftsinc.com/signup
and complete the fields. The first user to sign up is automatically assigned Administrator status.
The Administrator must then create user accounts for the Agency.
2.2.2 DOWNLOADING THE FTS360 CONFIG APP
The FTS360 Config App for use on an Apple or Android smart device uses Bluetooth technology to
provide direct, local access to a station, permitting configuration changes to it when in the field and
internet connection is not possible. The FTS360 Config App is designed to have the same look and
feel as FTS360 and will permit you to configure stations when within close proximity to the station.
The FTS360 Config App can be downloaded from the Apple App Store or Google Play. Search for
FTS360.
2.2.3 SYNCHRONIZATION
Prior to going to the field and immediately upon return (or when internet connection is possible),
you should log on to the FTS360 Config App to synchronize with FTS360. After synchronization
DO
NOT log off prior to going to the field. Any changes made in the field will not be reflected in FTS360
and FTS 360 will not be able to display data from that station until synchronization occurs upon
return from the field.
2.2.4 USING THE FTS360 CONFIG APP IN THE FIELD
In order to use the FTS360 Config App to communicate directly with a station you must:
•
have access to FTS360 and be assigned either an Administrator or Technician role
•
have downloaded/updated the FTS360 Config App onto the smart device which will be used
in the field