FTS LT1-CELL-VZ, Руководство оператора

Страница: 45 / 66

700- LT1-Man Rev 8 09 Feb 2021 Page 39/60
CONFIGURING SENSORS
Once connected to the LT1 and powered, use the FTS360 Config App to add and configure the
sensor(s) for the station. Ensure you test each sensor and save the settings before exiting the page.
Upon completion, ensure you synch your changes with FTS360.
When determining the sample schedule, bear in mind the time it takes for the sensor to take and
register a sample and for that information to be buffered prior to the scheduled transmission.
6.1 SENSOR TEMPLATES AND THE LIBRARY
The Sensor Library consists of specific templates for use with SDI-12 and NMEA sensors. The
templates have pre-defined default configurations which simplify setting up sensors. The drop-down
Sensor-Type menu consists of Custom Sensor templates, displayed first and identified by an
asterisk, and Built-In Sensor Templates. Custom Sensor Templates are generated by your Agency in
accordance with its specific needs. Built-In Sensor Templates are generic templates with the most
common settings for the listed sensor. Refer to the FTS360 Manual for details on adding Custom
templates to the library.
When a sensor template is selected, any of the default settings for that template may be changed
and saved to the sensor being configured. These changes will only be saved to that sensor and will
not affect the library item. In other words, the next time the library item is displayed from the drop-
down menu, the original default settings will be in place. If you have several sensors that you would
like to configure with the same settings, consider creating a custom template using FTS360.