700- LT1-Man Rev 8 09 Feb 2021
Page 14/60
FTS360 CONFIG APP GENERAL INFORMATION
The FTS360 Config App
on a smart device uses Bluetooth technology to provide direct, local access
to an LT1 station within 50 feet. It is used for initial station setup and sensor configuration. It is also
used for making configuration changes in locations where internet connection, and therefore
remote access by FTS360, is not possible. Afterwards, it must be synchronized with FTS360 for the
station and its data to be accessible in FTS360. The FTS360 Config App is designed to have the same
look and feel as FTS360. Note that screens may not appear the same on all devices but all screens
will have the same functionality.
3.1
STATION FUNCTIONALLITY WHILE CONNECTED TO THE APP
When connected, the station will continue to process remote and scheduled tasks. Data will
continue to be logged but will not be transmitted until disconnection takes place. However, any
actions or requests made using the FTS360 Config App take priority; if there is a conflict, remote or
scheduled requests will not occur. This may result in some missed data points during the period of
connection.
Transparent Mode:
When communicating with an SDI-12 sensor using SDI-12 commands in
transparent mode, the collection and transmission schedule for ALL sensors is suspended until
transparent mode is exited.
3.2
REQUIREMENTS TO USE THE FTS360 CONFIG APP
In order to use the FTS360 Config App, you must be assigned as either an Administrator or
Technician in FTS360. A Viewer will not be able to use the FTS360 Config App, as Viewers are not
able to configure stations.
In order to communicate directly with a station you must:
•
Have access to FTS 360 and be assigned either an Administrator or Technician role
•
Have downloaded the FTS360 Config App onto the smart device which will be used
in the field
•
Have logged onto the FTS360 Config App and synchronized it with FTS360.
Synchronization occurs automatically by logging onto the FTS360 Config App with an
internet connection
•
Ensure you have logged into the FTS360 Config App as a member of the Agency to which the
station is assigned.
6
Available from
for Android
for FTS360 Config.
Содержание LT1-CELL-VZ
Страница 6: ...iv D 6 CONFORMITIES 58 D 7 RF EXPOSURE 59...
Страница 61: ...700 LT1 Man Rev 8 09 Feb 2021 Page 55 60...
