700- LT1-Man Rev 8 09 Feb 2021
Page 38/60
5.4.5
TEST GOES TRANSMISSION
The test transmission is sent to the LRGS and is used to confirm correct satellite network and
antenna power settings. It will not transmit data. To send a test transmission, select the “Test GOES
Transmission” button. If you were a assigned a test transmission channel, enter that. If not, select
the appropriate channel for your satellite assignation.
Type:
there are three types of Test transmissions: Fixed (default - standard use), Random, and
Carrier (diagnostic tool - rarely used).
Fixed:
The common form of test transmission. It consists of the message header followed
by a series of plain text strings:
001014E809124191542G47-0NN195EFF00396
Operator Initiated Test Transmission:
Operator Initiated Test Transmission:
Operator Initiated Test Transmission:
Operator Initiated Test Transmission:
Operator Initiated Test Transmission:
Operator Initiated Test Transmission:
Random:
Enter the test transmission channel you were assigned.
Consists of the message
header followed by a line of text:
001014E809124191542G47-0NN195EFF00396
Field Initiated Random Test Transmission
Carrier:
Carrier test transmissions are not normally required for standard station
operations. Carrier test transmissions are used for diagnostic purposes in conjunction with
specialized equipment to see if the antenna is receiving enough power or to confirm the RF
Carrier frequency of the transmission. As such, a tone at the frequency of the message is
sent out rather than a text message.
5.5
IRIDIUM SETTINGS
The LT1-IRID is shipped with a fully provisioned Iridium modem. The iridium Settings page will
indicate the IMEI number and that the Registration was successful (see section 5.2.3). Data will be
sent as determined in accordance with the sensor configuration when the satellite is in range.
Содержание LT1-CELL-VZ
Страница 6: ...iv D 6 CONFORMITIES 58 D 7 RF EXPOSURE 59...
Страница 61: ...700 LT1 Man Rev 8 09 Feb 2021 Page 55 60...
