FTS LT1-CELL-VZ, Руководство оператора

Страница: 12 / 66

700- LT1-Man Rev 8 09 Feb 2021 Page 6/60
1.7.1 LT1-CELL
Firmware updates for LT1-CELL units are conducted through FTS360 due to the bi-directional
telemetry. In FTS360, select the station and the “Edit Station” button. Select the Update Firmware
button and follow the prompts.
1.7.2 LT1-GOES
IMPORTANT:
Prior to conducting a firmware update on an LT1-GOES ensure you do the
following:
•
Update to the most current version of the FTS360 App to ensure all features of the
update will function.
•
Download the FW upgrade to a FAT32 formatted SD card before travelling to the
field.
NOTE: For LT1-GOES, 360.ftsinc.com will automatically download both FW upgrade
variants (for version 1 and version 2 models). Bring both to the field: the LT1-
GOES will only accept the FW version specific to its model.
Both versions will automatically download; however, a prompt requesting the
multiple file download may appear the first time this is done.
Updating using a smart device:
Updating an LT1-GOES/LT1-IRID station’s firmware requires a FAT32 formatted SD card, a device
capable of downloading to an SD card, and a site visit to the LT1 station.
1) Ensure you have the most recent version of the FTS360 Config App downloaded to your
device.
2) From FTS360, go the Station’s page and select the “Edit Station” button.
3) Select the Download Firmware button.
Note: The firmware file will be saved with the following naming nomenclature:
LT1_GOES_APP_[FW ver].bin
Example: For FW update ver 1.11.25 the file appears as LT1_GOES_APP_1_11_25.bin
4) Follow the prompts to download both the firmware update files to the SD card.
5) Prepare for a site visit (sync the FTS360 Config App and bring the SD card)
6) At the site, connect to the station.
7) From the Station dashboard. Select the Station arrow, then the “Update Firmware From SD
Card” button. Follow the prompts.
IMPORTANT! DO NOT use the FTS360 Config App until the FW update has completed.