700- LT1-Man Rev 8 09 Feb 2021
Page 35/60
2)
Use the drop-down menus to select the
message type (Pseudo Binary-USGS, SHEF, or
BLM)
3) Input number of redundant messages (optional – not supported by BLM messages).
About Redundant Messages
: The content of messages can be configured to be repeated
in subsequent transmissions. Transmitting redundant copies is useful if any data is
garbled or lost during a transmission so that it is more likely to receive a complete data
transfer. A transmission which has one redundant record consists of the most recent data
(as defined in the data set) followed by the data from the previously transmitted data set.
A transmission which has two redundant messages consists of the most recent data
followed by the data from the two previously transmitted data sets, etc.
4)
Press the
Add Fields
button and select the
desired data fields to be included in the
message.
About Fields:
The list includes built-in data
points and configured data points from any
attached sensors.
5)
Select “Done” when finished.
6)
Message fields can be viewed and amended
using the Details cog.
The list order can be changed using the shift
up/down arrows
The selected fields will be listed in the order of
transmission. The list (transmit) order can be
rearranged by using the Shift arrows. Field
details can be reviewed and amended by
selecting the Details cog.
7)
Select Save Message
Содержание LT1-CELL-VZ
Страница 6: ...iv D 6 CONFORMITIES 58 D 7 RF EXPOSURE 59...
Страница 61: ...700 LT1 Man Rev 8 09 Feb 2021 Page 55 60...
