700- LT1-Man Rev 8 09 Feb 2021
Page 22/60
3.9.6
ACTION BUTTONS
Add Sensor:
Select this to add an SDI-12 sensor (see Chapter 6 for details). Follow prompts on
successive screens and complete fields with desired sensor type/details.
Refresh:
This will refresh the Station identification and health portion of the dashboard.
SDI-12 Transparent Mode:
Provides capability to send SDI-12 commands to SDI-12 sensors (see
section 8.3 for details).
Last 72 Hours of data:
Will download selected data points within a defined timeline from the last
72 hours
Flash LEDs –
When selected will flash the LEDs. Used to quickly identify the LT1 if more than one is
in the area.
Station Disconnect:
Disconnects from station.
3.10
EDIT STATION SCREEN
Select the Station line to view the Edit Station Screen:
From this screen you can:
1)
Change the Station’s name
2)
View/change the Schedules for the LT1’s system
(battery voltage, case temperature, signal
strength) and location (latitude, longitude and
elevation) information
3)
View product information
4)
Update the firmware (see Section 1.6)
5)
Reset the station (see section 2.2.6)
3.11
STATION DISCONNECTION
Should the Bluetooth signal be interrupted and connection lost (ie: you move out of range), the
FTS360 Config App will indicate “Lost Connection Reconnect?”. You must return within range and
re-connect with the station. Any changes made that were not saved before losing the connection
will have to be repeated.
Содержание LT1-CELL-VZ
Страница 6: ...iv D 6 CONFORMITIES 58 D 7 RF EXPOSURE 59...
Страница 61: ...700 LT1 Man Rev 8 09 Feb 2021 Page 55 60...
