FTS LT1-CELL-VZ, Руководство оператора

Страница: 13 / 66

700- LT1-Man Rev 8 09 Feb 2021 Page 7/60
8) Upon completion of the update you will automatically be disconnected from the station.
Re-connect to the station.
9) Safely eject the SD card used for the firmware update (from the Station Dashboard page
select the SD Card line and then the “Safely remove SD card” button. Follow the prompts.)
10) Replace the station’s original SD card.
NOTE the station’s SD card is an industrial card certified to operate within the LT1’s
environmental specifications and contains the station’s logs. If it is not replaced, or it is
replaced with a non-certified SD card, station logs may be compromised.
Updating using a Windows 10 PC
You will need the Windows 10 PC and a Micro-B data-USB cable
1) Ensure you have the most recent version of the FTS360 Config App downloaded to your PC.
2) From FTS360, go the Station’s page and select the “Edit Station” button.
3) Select the Download Firmware button.
4) Follow the prompts to download the firmware update to your PC. Copy both firmware files
to an accessible folder on the PC. Download both FW upgrades.
Note: The firmware file will be saved with the following naming nomenclature:
LT1_GOES_APP_[FW ver].bin
Example: For FW update ver 1.11.25 the file appears as LT1_GOES_APP_1_11_25.bin
5) Prepare for a site visit (sync the FTS360 Config App and bring the data-USB cable)
6) At the site, connect the PC to the station using the data-USB cable.
7) Select the Station arrow, then the Update Firmware button. Follow the prompts.
IMPORTANT! DO NOT use the FTS360 Config App until the FW update has completed.
1.7.3 LT1-IRID
The LT1-IRID firmware can be updated remotely through FTS360 or on-site. Note that data charges
will apply for remote updates.
If updating remotely through FTS 360, follow the firmware update instructions for LT1-CELL (section
1.7.1)
If updating on-site, follow the firmware update instructions for an LT1-GOES (Section 1.7.2)