Switching-type sensor
Setting
Lambda values
Switching-type sensor
Residual oxygen content
Display of the current residual oxygen content.
Lambda probe voltage measured
Display of the current measured Lambda probe voltage.
Lambda probes correction value
Correction value for lambda measurement. If too much is
displayed, this value must be set to positive, if too little is
displayed, the value must be set to negative.
Lambda probe voltage corrected
Display of the measured Lambda probe voltage, at which
the
“Lambda probe correction value”
is taken into
account.
Broadband probe
Setting
Lambda values
Broadband probe
Residual oxygen content
Display of the current residual oxygen content.
Broadband probe heating current
Display of the measured broadband probe heating current.
Broadband probe heating voltage
Display of the measured broadband probe heating voltage.
Broadband probe Nernst voltage
Display of the measured Nernst voltage of the broadband
probe.
Broadband probe pump current
Display of the measured broadband probe pump current.
Broadband probe internal resistance
Display of the measured internal resistance of the
broadband probe.
4
Parameters overview
System
114
Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
