Fresenius Kabi Volumat Agilia, Техническое руководство, Страница: 42 / 138

42 va04.3_001g_Eng.fm
Ma
in
te
na
nc
e pr
év
en
tive
4.4.13 Test 11, Ageing test
This text checks the motor block/pumping system is functioning correctly as well as the pump
occlusivity.


Test 11
, press "enter".

The main, " Ageing test " menu displays.


When the pump is fitted with a tube, open the

administration set clamp by pressing the bolus key.
 Select your submenu using the "OK" key.

Flow rate : between 0.1 and 1200ml/h

Modify the value using the following selection keys:
 for the hundreds and tens, use the double arrows to
increase or decrease
 for the units, increase or decrease using the single
arrows.

Press "OK" to validate and to move to the next step.

Mode : Go forward or synchro or go forwards/backwards
or backwards

Modify your choice using the single arrow selection keys .

Press "OK" to confirm and move to the next step.

Steps numbers or turns number :

Content or value lying between 1 and 9999

Modify the value using the single arrow selection keys

Press "OK" to confirm and move to the next step.

Current : high, low, auto or error.

Modify the value using the single arrow selection keys ,

Press "OK" to confirm and move to the next step.
 Press "OK" to confirm and start up the test.


The " Ageing test " menu displays:
 The flow rate and current category for the

motor command are displayed at the top

of the screen.
 The number of steps decreases according to

the actual change for the number of steps.
 Press "exit" to return to the " Test " menu.
During the test, the rotation control is activated and the device set in error if a problem is
detected.

In a test with a defined number of steps/cycles or using a synchro mode, the test ends
when the requested position is reached.