4. Other Radio Settings
Hop Table Version - 900MHz
Setting
Description
In the terminal interface, enter the number that corresponds to the frequency
band:
Number to
Enter in
Terminal Menu
Frequency Band
0
902-928 MHz, uses the full band
1
915-928 MHz
2
903.744-926.3232 MHz
3
916-920 MHz
4
921-928 MHz
5
902-911_919-928 MHz, uses 902-928 MHz with
center frequencies of 911-919 MHz notched out.
6
902-915 MHz
4.1.5 Low Power Mode
Low Power Mode
Setting
Description
Default Setting:
0
Options:
Any number between 0 and 31.
Note
: The higher the number, the greater the power consumption
decrease.
Terminal Menu:
(3) Edit Radio Transmission Characteristics > (9) Low Power Mode
Description:
Allows a MultiPoint Slave to consume less power, primarily by dimming the
radio's LEDs.
l
When set to
2
through
31
, the radio sleeps between slots.
l
When the radio is asleep, it hears nothing from the I/O Master.
Example
: At a setting of
2
the radio sleeps 1 out of 2 slots; at a setting
of
3
the radio sleeps 2 out of 3 slots, and so on.
This table shows the changes at different
Low Power Mode
settings. The
actual current draw depends on many factors. The table below gives only a
qualitative indication of supply current savings. A low number reduces
latency and a high number reduces current consumption.
Page 62 of 131
LUM0008AG Rev Sep-2015
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
Содержание FGR2-IO-IOE
Страница 131: ......
