FreeWave FGR2-IO-IOE, Руководство пользователя и справочное руководство

Страница: 5 / 131

Wire Replacement I/O (900 MHz): User Manual and Reference Guide
Table Of Contents
Preface 11
1. Introduction 15
1.1 I/O Product Family 16
1.2 Wire Replacement I/O Systems 17
1.3 Configuration Tool Options 19
1.3.1 Tool Suite and Terminal Emulators 20
1.4 Radio Setup Mode 20
1.4.1 Using Tool Suite to Connect to and Program Radios 21
1.4.2 Accessing the Setup Menu Using a Terminal Emulator 22
View the Setup menu in Board-level Radios 23
1.5 LED Indications 24
2. Configuring an I/O Master 25
2.1 Configuring an I/O Master 26
2.2 I/O Masters in Tool Suite 28
2.3 Setting the I/O Master's Role in the Network 29
2.4 Establishing Communication Between the I/O Master's Data Port and an End Device 29
2.4.1 Baud Rate 30
2.4.2 Data Parity 30
2.4.3 Flow Control 31
2.4.4 Modbus RTU 31
2.4.5 Serial Interface 32
2.4.6 Setup Port 33
2.4.7 Turn Off Delay 33
2.4.8 Turn On Delay 34
2.4.9 Use Break to Access Setup 34
2.5 Establishing Communication with I/O Slaves 35
2.6 Setting I/O Master RF Transmission Characteristics 36
2.6.1 Frequency Key - 900MHz 36
2.6.2 Max Packet Size and Min Packet Size 37
2.6.3 RF Data Rate 38
2.7 Setting I/O Master MultiPoint Parameters 39
2.7.1 Master Packet Repeat 39
2.7.2 Repeaters 39
2.7.3 Subnet ID - I/O Master 40
LUM0008AG Rev Sep-2015 Page 5 of 131
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.