frako 38-00400, Руководство по эксплуатации

Страница: 5 / 72

5
Figure 48 Control response after setting target cos
φ
= 0.92 ind, limitation = +1.0 48
Figure 49 Control response after setting target cos
φ
= 0.92 ind, limitation = +1.0,
parallel shift = -1.0 49
Figure 50 Control response after setting target cos
φ
= 0.95 cap, limitation = -1.0,
parallel shift = 0 49
Figure 51 Phase L1 is the control phase 50
Figure 52 General settings menu 51
Figure 53 Capacitor stages 52
Figure 54 Set limits 1/2 52
Figure 55 Set limits 2/2 52
Figure 56 Change set limit for switching cycle counter 53
Figure 57 Alarm management 54
Figure 58 Alarm management; here the Display alarm option 54
Figure 59 Extensions menu 55
Figure 60 Modbus configuration 55
Figure 61 Factory default settings 56
Figure 62 Password prompt 57
Figure 63 Info / status 1/3 57
Figure 64 Info / status 2/3 57
Figure 65 Info / status 3/3 58
Figure 66 PQC status overview 58
Figure 67 Total corrective power Q 58
Figure 68 Capacitor stages table 59
Figure 69 Diagram showing all stages at 100% 59
Figure 70 Diagram showing corrective power of all stages 59
Figure 71 Switch cycle diagram 60
Figure 72 Current harmonics diagram, y-axis 100% 60
Figure 73 Current harmonics zoomed in, y-axis 25% 60
Figure 74 Voltage harmonics table 60
Figure 75 Manual frequency analysis 61
Figure 76 About PQC 61
Tables
Table 1 Connection types for current transformers in L1, L2 and L3 31
Table 2 c/k settings at 400 V AC and 50 Hz 32
Table 3 Key functions 33
Table 4 Factory default settings 62
Table 5 Instrument versions 65
Formulas
Formula 1 Calculation of c/k 32