Fostex UR-2, Руководство пользователя

Страница: 54 / 96

-54-
Model UR-2 <Playback>
By setting the "Auto Play" menu item in the PLAY
SETUP" menu of the MENU mode to "On", the
unit automatically start playback after skipping
to a desired file using the [
] or [ ] key dur-
ing playback (or after directly locating a marked
position using the numeric keys of a USB key-
board).
By default, the "Auto Play" menu item is set to
"On" and the [AUTO PLAY] indicator on the front
panel is lit.
READY
EJECT
AUTO PLAY
SHIFT MODE
PLAY
TIME REC
EDIT REPEAT
FILE SEL DISPLAY
R
STRG SEL
SD-2
HOST
SD-1
UR-2
STEREO RACK MEMORY RECORDER
[AUTO PLAY] indicator
<Memo>: See "PLAY SETUP menu details" on page
57 for details about the "Auto Play" menu item.
Auto play function
By setting the repeat function to "On", the unit
repeats playback in the current playback mode
until you press the [STOP] key.
You can turn on or off the repeat function by
pressing the
[
SHIFT
]
key to turn on the shift mode
followed by the [TIME]/[
REPEAT
] key while the unit
is stopped.
ABS 0
REC END
READY
EJECT
AUTO PLAY
SHIFT MODE
PLAY
TIME REC RDY EXIT
EDIT REPEAT
FILE SEL DISPLAY
REC STOP
MRGN RST
STRG SEL
SD-2 SD-1
UR-2
STEREO RACK MEMORY RECORDER
[
SHIFT
] key
[
REPEAT
] key
<Memo>:
You can also turn on or off the repeat
function using the "Repeat" menu item in the
PLAY SETUP menu of the MENU mode (see page
57).
Repeat function
During playback, you can use the [ F FWD] or
[ REW] key to enter cueing mode, in which
you can cue (fast wind while monitoring audio)
forward or backward at up to eight times the
normal speed.
<Memo>: By default, playback audio while cue-
ing is output from the [ANALOG OUT], [DIGITAL
OUT] and [PHONES] connectors, therefore, you
can monitor it using headphones or external
monitor speakers. However, you can output au-
dio only from the [PHONES] connector using the
"Cue Monitor Out" item in the SYSTEM SETUP
menu of the MENU mode. If you do not wish to
output cueing audio from PA speakers, use this
setting (see page 77 for details).
<Memo>:
Each press of the [ F FWD] or [
REW] key changes the cueing speed among two,
four, six and eight times the normal speed. While
cueing is being performed, the display shows any
of the following icons.
MAX MIN MAX MIN
MIC GAIN MIC IN INPUT LEVEL ABS 0
REC END
Y EXIT MIC IN
PHANTOM
MIC SET
FILE/CURSOR
MENU / ENTER
STOP PLAY REW F FWD
MRGN RST CUE PREV NEXT
CUE/LOCATE
TIME EDIT
[ REW] key
[ F FWD] key
<Note>:
The cueing speed at six or eight times
the normal speed is available only for a file
with 48 kHz FS or lower sampling frequency.
Cueing function
<Memo>: If you use the [ ] or [ ] key while
stopped to skip to a desired file, the unit stops at
the beginning of the file without automatically
starting playback even if the "Auto Play" menu
item is set to "On".
REW direction FWD direction
One
Two
Three
Four
Five
The number of
key press