-24-
Model UR-2 <Preparation>
You can adjust the brightness of the display, in-
verse the display and enlarge the file name dis-
play.
In the following description, it is assumed that
the unit is stopped.
4)
Press the [ENTER] key.
The second digit starts flashing.
You can edit the value at the flashing point
using the [MENU] dial.
You can move the flashing point using the
[
] and [
] keys.
5)
After editing time data, press the [ENTER] key
to confirm the editing.
By pressing the [ENTER] key at the timing
of time signal, you can set the exact time.
6)
Press the [STOP] key to exit the MENU mode.
You can also exit the MENU mode by
pressing the [EXIT] key repeatedly.
Flashing
<Memo>:
The unit has an internal
lithium battery which is used for driv-
ing the realtime clock. The battery life
is approximately four or five years.
Battery replacement must be performed
by an authorized person only.
If the following message appears on the
display, ask your local Fostex dealer or
sale office for battery replacement.
Adjusting the brightness of the display
1)
Press the [
SHIFT
] key to enter the shift mode
(light up the SHIFT indicator) and press the
[DISPLAY] / [
] key.
The following popup window appears on
the display.
2)
Use the [MENU] dial to adjust the brightness
and press the [ENTER] key to confirm the
setting.
The default brightness value is the
maximum brightness.
Pressing the [ENTER] key dismisses the
popup window.
Inversing the display
1)
Press the [ENTER] key to enter the MENU mode.
2)
While "SYSTEM SETUP" is highlighted, press
the [ENTER] key.
The display now shows the menu items of
the SYSTEM SETUP menu.
3)
Use the [MENU] dial to highlight "Display INV."
and press the [ENTER] key.
Adjusting the display
<Memo>:
When a USB keyboard is con-
nected to the unit, you can also enter
time data from the keyboard (see page
67).
