-43-
Model UR-2 <Playback>
When you select the ALL play mode, "
" lights
on the display.
Playback in ALL play mode
In the ALL play mode, the unit continuously plays
back all files on the current storage device in re-
cording order. (If you want to play back files ran-
domly, use the CHAIN ALL play mode described
later.)
When finishing playback of the last file, the unit
stops at the finishing position.
Normally the unit plays back files on the current
storage device in the recording order. However,
using the [
] or [
] key or from the file selec-
tion screen, you can select a desired file to be
played back (see page 42).
When you select the RELAY play mode, "
"
lights on the display.
Playback in RELAY play mode
In the RELAY play mode, the unit continuously
plays back all files on the current storage device,
and switches the current storage device, then con-
tinuously plays back all files on the next current
storage device.
<Note>:
When two storage devices are set, if you
select the RELAY play mode and then remove
one of the storage devices, the unit cancels the
RELAY play mode and enters the ALL play mode.
<Note>:
If you select a file from which playback
starts, the files created earlier than the selected
file are not played back. For example, if you se-
lect the "005" file when the current storage de-
vice has ten files from "001" through "010", files
005 through 010 are played back but files 001
through 004 are not played back.
<Memo>:
By activating the repeat function, you
can play back files repeatedly until you stop by
pressing the [STOP] key (see page 54).
<Memo>:
The unit plays back file in the record-
ing order. Even if you edit a file name, the play-
back order does not change.
LOCK
LOCK
USB
<Note>:
When the unit switches the current
storage device, it takes some time for loading
so there is a silent space of a few seconds.
<Memo>:
The current storage device changes in
the following order.
<Note>:
If you copy files recorded using a com-
puter to an SD card and set the SD card to the
UR-2, the unit basically plays back files on the
card in the order of file copying to the card.
However, a file whose file name has been edited
by a computer may be played back at the last.
<Memo>:
When playing back a file, you can mix
a microphone signal and output the mixed sig-
nal (see page 38).
SD1
SD2
<Note>:
When more than one folder exists on
the current storage device, after the unit fin-
ishes playback of the last file of the current
folder, it switches the current storage device
to the next one.
<Note>:
When the unit switches the storage
device to the next one which has more than
one folder, the unit brings up the folder se-
lection screen and stops (see page 29).
