-42-
Model UR-2 <Playback>
(2)
Use the [MENU] dial to select a desired file
and press the [ENTER] key.
The display now shows the Home screen
for the selected file.
Playback in SINGLE play mode
<Memo>:
You can also bring up the file selec-
tion screen above by the following procedure.
1) While the unit is stopped, press the [ENTER]
key to enter the MENU mode.
In the SINGLE play mode, the unit plays back a
current file only. After finishing playback, the
unit stops at the beginning of the file.
To play back a different file, select a desired file
using either of the methods described below.
2) Use the [MENU] dial to select "FILE SEL" and
press the [ENTER] key.
The display shows the file selection screen.
<Memo>:
By activating the repeat function, you
can play back a file repeatedly until you stop by
pressing the [STOP] key (see page 54).
<Memo>:
You can mix a microphone source while
playing back a file. By pressing the [MIC IN] key,
the unit accepts the microphone signal from the
[MIC IN] connector. You can adjust the micro-
phone level using the [MIC GAIN] control.
MAX
MIN
MAX
MIN
MIC GAIN
MIC IN
INPUT LEVEL
ABS 0
REC END
REC RDY
EXIT
MIC IN
PHANTOM
MIC SET
FILE/CURSOR
MENU / ENTER
REC
STOP
PLAY
REW
F FWD
MRGN RST
CUE
PREV
NEXT
CUE/LOCATE
TIME EDIT
RECORDER
[MIC GAIN] control
[MIC IN] key
You can mix the microphone signal with the file
playback sound. You can also output the micro-
phone signal alone while the unit is stopped.
When you mix the microphone signal with the
file playback sound, the file playback sound is
attenuated by 6 dB by default.
For the details about settings for microphone
usage, see "Using an external microphone" on
page 38.
When you select the SINGLE play mode, "
"
lights on the display. (By default, the SINGLE play
mode is selected.)
Selecting a playback file
While the unit is stopped, pressing the [
] or
[
] key skips to the beginning of the previous
or next file. Therefore, you can select a desired
file by pressing the appropriate [
] or [
]
key as many times as required.
• Using the file selection screen
(1)
While the unit is stopped, press the
[FILE SEL] key.
The display shows the file selection screen
on which recorded files are listed.
• Using the [
] and [
] keys
