manualshive.com logo in svg

Fostex UR-2, Руководство пользователя

Поделиться
Скачать
Fostex UR-2 Скачать руководство пользователя страница 11

-11-

Model UR-2 <Introduction / Overview>

The unit uses an SD card (SDHC supported) or
USB memory as a storage device for recording
and playback.

It supports both FAT 16 and FAT 32 file formats.
For an SD card, the maximum recording capac-
ity is 32 GB, while the minimum recording ca-
pacity is 128 MB. For a USB memory, the maxi-
mum recording capacity is not limited.
You can use any SD card or USB memory which
is FAT 16/32 formatted.

<Note>: 

In this manual, we sometimes call

an SD card or USB memory used for record-
ing and playback of the unit as a "storage
device".

When you bring the unit from a cold place to a
warm place, moisture may condense on the drive,
display, panels, etc. In such a case, leave the unit
for a while until it warms up and evaporates any
moisture.

After you buy a new storage device (an SD (SDHC)
card or USB memory), you do not need to format
it before using with the unit.

However an SD (SDHC) card which has been for-
matted using a formatting software for a com-
puter cannot be used with the unit (though a USB
memory which has been formatted using a for-
matting software for a computer can be used with
the unit).

To use such an SD (SDHC) card with the unit,
download the software (freeware) from the SD
Association website (see URL below) and format
the card using it. This software formats an SD
(SDHC) card to conform to the SD or SDHC speci-
fication (see the SD Association website for de-
tails).

http://www.sdcard.org/about/downloads/

The software of the unit may be upgraded with
the feature/function enhancement.
You can check the latest software version infor-
mation via the Fostex website (http://
www.fostex.com) or your nearest Fostex service
station.

You can download the upgrade via the Fostex
website and upgrade the unit by yourself. See
page 69 of this manual for details.

About storage devices

Formatting of a storage device

About version upgrade

Notes on moisture condensation

<Note>: 

Please note that due to a compat-

ibility problem between the unit and the
controller on a USB memory, the unit may
not  recognize the USB memory or record-
ing may become unstable.

Содержание UR-2

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды