Model UR-2 <Recording>
-36-
Editing a CUE point
By selecting the desired CUE on the CUE LIST screen
and pressing the [ENTER] key, you can bring up the
CUE editing screen. By default, "Label" flashes.
On this screen, you can edit a CUE label and CUE
position, as well as delete a CUE.
• Editing a CUE label
By pressing the [ENTER] key while "Label" flashes,
the first character of the current label starts flash-
ing and you can now edit it.
Use the [
] and [
] key to move the editing
position and use the [MENU] dial to select a charac-
ter. After you finish editing, press the [ENTER] key
to confirm the editing.(You can also edit a label us-
ing the USB keyboard.)
<Memo>:
By selecting the desired CUE on the CUE
LIST screen and pressing the [CUE/LOCATE] key,
you can skip to the CUE point.
• Editing CUE time data
By using the [MENU] dial to highlight "<Position>"
and pressing the [ENTER] key, the frame digit of
CUE point time data starts flashing and you can now
edit it.
Use the [
] and [
] key to move the editing
position and use the [MENU] dial to select a value.
After you finish editing, press the [ENTER] key to
confirm the editing. (You can also edit a label using
the USB keyboard.)
<Note>:
If you enter an illegal time value and
press the [ENTER] key, the display briefly shows
"Illegal Time!" and cancels editing.
<Memo>:
After entering a new time data, press-
ing the [CUE/LOCATE] key locates the unit to the
new CUE point.
• Deleting a CUE point
By using the [MENU] dial to highlight "<Delete>" at
the bottom of the display and pressing the [ENTER]
key, "Sure?" starts flashing.
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
