90
ROCK IMAGER User's Guide | Chapter 14: ROCK MAKER: The Crystallography Control Center
Once
ROCK IMAGER
has taken images, you view them with
ROCK MAKER
. Although you should refer
to the ROCK MAKER help files for more details, this topic provides a quick overview about how to
access and view your images with the ROCK MAKER software.
If an experiment has images, the experiment will automatically open to Image View when you open
the plate. However, you can access images view at any time through the following methods.
Prerequisites
●
You are running ROCK MAKER version 3.0 or newer.
●
You created an experiment in ROCK MAKER.
●
You imaged the experiment's plate one or more times with ROCK IMAGER.
To view Images in ROCK MAKER:
1. In the
Experiment
contextual tab set, click the
View
tab, and click the
Image View
button
in the
Canvas Mode
group.
2. Click the
Image View
button on the
View
bar.
3. Click the
Navigator
button on the
View
bar to be able to look at image thumbnails and
move around from one image to the next.
The Navigator contains all controls necessary to browse through plates, wells, drop, regions,
imaging settings, and imaging sessions. Two modes are available on the Navigator,
Thumbnail
View,
and
Composite View
. Thumbnail View is the first mode you see. Composite View is
accessible by clicking the Composite View button at the bottom-left of the Navigator. To
bring up the full-size image of any thumbnail you see, double-click the thumbnail.
Viewing and Scoring Images in ROCK MAKER
The Image View Button
Image View on the View Bar
The Navigator on the View
