48
ROCK IMAGER User's Guide | Chapter 9: Using RI 2, FRAP Benchtop & SONICC Benchtop
●
To image an entire plate with the imaging setting(s) of choice, go to the
Imager
menu,
point to
Image
, and select
Plate(s) Using
. ROCK IMAGER will display a dialog box that
asks you to select available imaging settings (i.e. visible, High Throughput (HT) FRAP,
and Full Recovery FRAP).
●
To inspect your plates well-by-well or drop-by-drop without taking images, go to the
Live Image
tab and use the manual navigation controls.
●
To image a specific drop with the default imaging settings, go to the
Imager
menu, point
to
Image
, and select
Drop
.
●
To image a specific drop with your choice of imaging settings, go to the
Imager
menu,
point to
Image
, and select
Drop Using
.
●
If you have tagged certain drops as interesting in ROCK MAKER and wish to image only
those drops, go to the
Imager
menu, point to
Image
, and select
Interesting Drops
to
use the default imaging setting or point to
Image
, and select
Interesting Drops Using
to use a custom imaging setting
1
.
●
If you want to run Full Recovery FRAP imaging on the drop in view, go to the
Imager
menu and select
Full Recovery FRAP Current Position
to use the default settings or
Full
Recovery FRAP Current Position Using
to select new settings.
5. When your plates have been imaged at least once, you can view the images in ROCK MAKER.
6. When you are ready to remove the plate(s) from FRAP:
●
Go to the
Imager
menu and select
Load/Unload Plate
.
●
Open the FRAP door.
●
Remove the plate(s) from the imager hand.
1
Requires ROCK MAKER 2.8 or later
