Foma SA800i Скачать руководство пользователя страница 47

Страница: 47 / 564

Cha

ing mo

pho

Be
for
e

us
in

g SA8

Open the cover of the external connection port of FOMA terminal.

Insert the connector of AC adapter or DC adapter with the arrow mark

on top into External connection port of FOMA terminal.

•

Insert horizontally until it clicks.

Unfold the power plug of AC adapter and insert it into AC outlet.

For DC adapter, insert the plug into Cigarette lighter socket of a car.

The charge starts with a sound and the charging lamp lights up.

Remove the charger plug of AC adapter from AC outlet after

completing charge.

For DC adapter, remove the plug from Cigarette lighter socket.

Be sure to press the release buttons and pull out the connecter

horizontally, to remove the connecter from FOMA terminal.

•

Do not force to pull, or it may cause damage.

Close the cover of External connection port of FOMA terminal.

Information

•

Red lamp lights up while charging. The lamp is turned off after completing charge.

•

Charge lamp may not light up immediately after starting charging. If the lamp does not light up after a few

minutes, disconnect FOMA terminal from AC adapter (or desktop holder) or DC adapter then reconnect to start

charging.

•

FOMA terminal, battery pack and AC adapter may become warm while charging but that phenomenon is

normal.

•

Connect AC adapter to AC 100V outlet.

•

Do not use DC adapter when the vehicle's engine is not running. It may cause the car battery to be discharged.

•

Do not force to remove/insert the connector.

•

The fuse (2A) of the DC adapter is a consumable part. Contact your nearest automotive supply stores for

replacements.

•

Always use DC adapter with a negative-ground vehicle. Never plug it into a positive-ground vehicle.

•

Data saved/registered in FOMA terminal remains about 1 month with the battery pack removed or battery

empty. The data may be lost after 1 month. For data may be lost due to failure, repair or other handling of FOMA

terminal, it is recommended to maintain a separate record of the data registered in your FOMA terminal. In case

that saved or registered data is lost, DoCoMo assumes no responsibility for the loss.

DSC01_E.book 45 ページ２００６年２月１４日　火曜日　午前１１時１５分

Содержание SA800i





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SA800i

Отзывы:

Похожие инструкции для SA800i

Бренды по названию

Популярные бренды

Foma SA800i, Руководство пользователя

Результаты поиска

Содержание SA800i

Отзывы:

Похожие инструкции для SA800i

Бренды по названию

Популярные бренды