Foma P901ITV, Руководство пользователя

Страница: 396 / 521

389
Net
wor
k
Servi
c
e
Bar Nuisa
nce
Cal
ls
You can automatically forward the calls from the
specified phone numbers stored in the Phonebook,
regardless of the Activate/Deactivate setting for Call
Forwarding Service.
You can specify up to 20 phone numbers.
This setting is valid only when the caller notifies his/her
caller ID. It is advisable to activate “Caller ID request” at
the same time.
1
Detailed Phonebook display ( )
Restrictions Enter your Terminal Security
Code Call forwarding
“Call forwarding” is indicated by “
★
”.
p To release “Call forwarding”, perform the same operation.
Forward Specified Calls to Specified
Destination
Information
p You cannot specify “Call forwarding” and “Voice mail” for the same
phone number stored in the Phonebook.
p When a call comes in from the phone number set with this function, the
ring tone sounds for about one second and the call is forwarded.
Further, you are notified of the call by “Received calls”.
p Even if you set this function, all incoming calls are not forwarded when
you set “PIM lock” while Call Forwarding Service is deactivated.
p If you have not signed up for Call Forwarding Service or have not set
the forwarding destination, the call will be a missed call.
p You cannot set “Call forwarding” for the phone number of the
Phonebook entry stored as Secret, and in the UIM.
p
Note that this function is released if you change the phone number you
have specified.
You can set the FOMA phone to block calls from specific
phone numbers, such as crank calls or vicious sales
calls. You can register up to 30 phone numbers.
You cannot operate this function when you are out of
the service area or out of reach of radio waves.
■
Relation between each Service and incoming calls
while Nuisance Call Blocking Service is activated
Refer to “Network Services User’s Guide” for more details.
1
Bar nuisance calls
Do the following operations.
Bar Nuisance Calls
Using Nuisance Call Blocking Service
< >
Service
Handling of incoming call from the caller
rejected as Register Caller
Voice Mail Service Call Rejection guidance is played back.
(Message is not held.)
Call Forwarding Service Call Rejection guidance is played back.
(Not forwarded to forwarding destination.)
Call Waiting Service Call Rejection guidance is played back.
Caller ID Display Request
Service Call Rejection guidance is played back.
Public Mode (Drive Mode) Call Rejection guidance is played back.
[Public Mode (Drive Mode) guidance is not
played back.]
Item Operations
Register caller You can register the phone number of the call
that arrived last for rejection.
YES OK
Delete recent entry The phone number registered for rejection last
only is deleted. (You cannot delete phone
numbers before the last one.)
YES OK
Delete all entries YES OK
Information
p
You cannot specify the other party’s phone number in advance. You
can reject the call from the phone number only that came in the last,
and you answered. The call you did not answer, or dialing from you
cannot not be registered. To specify for reject and register the phone
number, refer to “Network Service Guide”.
p You can register the call that notifies no caller ID by “Register caller”.
(See page 51 for Caller ID Notification)
p You may not be able to register the international call by “Register
caller”.
p The calls which were not received because of this setting are not stored
in “Received calls”.
p If you execute “Register caller” when you have already registered
30 phone numbers, the confirmation display appears asking whether to
delete the oldest phone number and register the new one. Select
“YES”.
p If a video-phone call comes in from the phone number registered for
rejection, the Call Rejection video guidance is displayed to the caller,
and the call is disconnected.
p You cannot check or make inquiries on the other party’s phone number
that has been registered as a call reject. You are advised to take a note
on the registered phone number.
※
The name of DoCoMo pager has been changed to Quickcast since January 2001.