Foma P901ITV, Руководство пользователя, Страница: 131 / 521

124
Ton
e/
Displ
a
y/L
ight Setting
Displ
ay Pho
neboo
k I
m
age
You can set Power Saver Mode to reduce the battery consumption by clearing the display.
1
Display Display setting Power saver mode ON or OFF
If the caller ID notified by the caller matches the phone number stored in the Phonebook, the image stored
in the Phonebook is displayed.
1
Incoming call Disp. phonebook image ON or OFF
You can set an image for incoming calls from each phone number stored in the FOMA phone’s
Phonebook.
1
Detailed Phonebook display ( ) Utilities Picture
Go to step 2 on page 123.
“Picture” is indicated by “
★
”.
p
To release the calling image for the phone number, perform the same operation.
Set Power Saver Mode
Setting at purchase ON
Information
p If you set to “ON”, after a certain period of time on the Stand-by display with no operation, the display goes off and the Command
Navigation key flickers at about five-second intervals when the FOMA phone is open.
p The setting here applies to “Power saver mode” of “Display light” as well. Also, use “Light time (minutes)” of “Display light” to specify a
standby time until Power Saver Mode starts. (See page 127)
p
The FOMA phone does not switch to Power Saver Mode during charging, while i-
α
ppli is set for the Stand-by display, or during
Multitask.
p In Power Saver Mode, displays are cleared also from the Private window. Press , , , , or for the displays to
appear on the Private window.
p
The information is displayed when you operate the FOMA phone or when a call comes in during Power Saver Mode. However, the
information is not displayed when a call comes in during Public Mode (Drive Mode).
Display Phonebook Image
Displaying an Image Stored in the Phonebook during Ringing
Setting at purchase ON
< >
Information
p The priority order of the display for call receiving is; “Setting by phone number”
→
“Setting by group”
→
“Disp. phonebook image”
→
“Display setting”.
p
For phonebook entries stored as secret data, images are not displayed during ringing even in Secret Mode or Secret Only Mode.
Set by Phone Number
Information
p You cannot set the calling image for the Phonebook entries stored as the secret data, and in the UIM.
p
Note that the “Picture” setting of “Utilities” is valid only when a caller ID is provided. It is advisable to activate “Caller ID request” in
advance.
p Note that the setting is released if you change the specified phone number.
p You can check which phone number in the Phonebook entry is set or release the setting also by using “Utilities” on page 109.