Foma P901ITV, Руководство пользователя

Страница: 376 / 521

369
Other U
s
eful
Function
s
Al
a
rm
3
Press ( ).
(Repeat)
1 time . . . . . . . . . .Does not repeat (sounds
just once). The setting for
Repeat is completed.
Daily. . . . . . . . . . .Sets the alarm to sound
every day. “ ” is
displayed on the detailed
display. The setting for
Repeat is completed.
Select day . . . . . .Sets the alarm for the
specified day of the week.
Put a check mark for the days of the week
to be set ( )
p
“ ” and “ ” switch each time you press
.
p Select at least one day of the week.
p
“ ” is displayed on the detailed display.
(Alarm tone)
Select a folder Select an alarm
tone
p If you select “OFF”, the setting of alarm tone is
completed.
p See page 351 for the folder and the list of
melodies.
(Volume)
Use to adjust the volume
p
If you set “Step”, the alarm tone is silent for
about three seconds, and then the volume
steps up every about three seconds, from Level
1 through Level 6.
(Snooze setting)
You can set whether to Snooze. If you set “OFF”,
set the time that the alarm tone is to continue
playing.
ON or OFF
p If you select “ON”, the setting is completed.
p See page 369 for how Snooze works.
Enter the ring time (minutes)
p You can enter from “01” through “10” in two
digits.
(Auto power ON)
You can set whether to turn on the power
automatically to make an alarm sound when the
alarm time arrives during power off.
ON or OFF
Item Operations
Information
p If the alarm tone sounds during a call, press any key to stop it. Once
again press any key to end the alarm including Snooze; then the alarm
message is cleared and the “Talking” display returns. If the other party
on the phone hangs up, an alarm including Snooze ends and the alarm
message is cleared.
p
If a call comes in or an alarm for Schedule, ToDo or Book Program
sounds in Snooze status, Snooze is released.
p If you select the alarm tone to be affected by UIM restriction (except for
“Pre-installed” one), and set the alarm to sound after turning on the
power automatically, the default alarm tone sounds.
p If you are near the electronic devices handling high precision
controllers or weak signals, or when you are in an airplane or hospital
where the use of mobile phones is prohibited, make sure that you set
“Auto power ON” to “OFF” and turn off the power to the FOMA phone.
1
While the alarm is displayed ( )
Do the following operations.
Function Menu while Alarm is Displayed
Function menu Operations
Edit Go to step 2 on page 368.
p You can edit also by pressing ( ).
Display detail You can display the detailed setting for the alarm.
Release this YES
Release all YES
■
When you set an alarm for “Alarm”, “Schedule”, and “ToDo”
If you set an alarm for “Alarm”, “Schedule”, and “ToDo”, the icons appear
on the desktop.
“
”. . . . . Displayed when an alarm is set for today (except the setting
for past time).
“ ”. . . . . Displayed when an alarm is set for tomorrow or onward only.
p If you set “Display” of “Main window clock” to “OFF”, or set the stored
schedule event/ToDo item to “OFF”, the icons are not displayed.
■
When the time specified for “Alarm”, “Schedule” or “ToDo”
comes
When the specified time comes, the alarm sounds for about five minutes
(in the case of “Alarm”, the alarm sounds for specified time), and the
vibrator works as you set for “Phone” of “Vibrator”. If you set “Snooze
setting” of “Alarm” to “ON”, the alarm sounds for about one minute at an
interval of five minutes, up to six times, until Snooze is released by
pressing
. During a call, the alarm sounds from the earpiece three
times repeatedly. The set alarm message and an animation linking to the
selected icon appear on the display.
p During operations
By “Alarm setting”, you can set the way of notifying during operations.
(See page 375)
“Operation preferred” . . . . Does not notify during operations.
“Alarm preferred” . . . . . . . Always notifies.
p
When you set some alarms to the same time
The alarm sounds in the priority order of “Alarm”
→
“ToDo”
→
“Schedule”
→
“Book program”. A missed schedule event or ToDo is notified by the
“Missed alarm” icon.
p
When the power is turned off
<Alarm>
When “Auto power ON” is set to “ON”, the power automatically turns on
to make an alarm notification sound. When the auto-power setting is
set to “OFF”, an alarm does not sound with the power stayed off. Even
after you turn the power on, the “Missed alarm” icon is not displayed.
<Schedule/ToDo>
Even when the specified time comes, the alarm does not sound. The
“Missed alarm” icon is not displayed even after turning the power “ON”.
p In Manner Mode
<Alarm>
When the specified time comes, the vibrator works. However, the alarm
sounds if you have set the operations for Manner Mode to “Original”
and set “Alarm vol.” to other than “Silent” in that setting.
<Schedule/ToDo>
When the specified time comes, the vibrator works and a message is
displayed. However, the alarm sounds if you have set the operations
for Manner Mode to “Original” and set “Phone vol.” to other than “Silent”
in that setting.