Foma N902iX, Руководство пользователя

Страница: 73 / 574

71
Continued on next page
Making/Receiving Phone Calls
<Se
t hold tone
>
<Set hold tone>
Setting the Hold Tone
Set the message given to the other party when you put a voice or videophone call on answer hold or
put an ongoing call on hold.
1
i
X X
“Talk”
X
“Set hold tone”
X
Select any item
* ： Not displayed if no Voice announce message has been recorded.
<Public mode (Driving mode)>
Using Public Mode (Driving Mode)
Public mode is an automatic answering service that allows you to keep good manners in a public
place. When a FOMA terminal is set to Public mode, it sends callers a message saying that you
cannot answer the call because you are driving or in a place (train, bus, theater, etc.) where you
should refrain from talking on a phone, and then ends the call.
d
Public mode can only be set or cancelled from the standby screen. (It can also be set or cancelled when
the “ ” icon appears.)
d
You can still make calls when Public mode is set.
d
This function is unavailable during data communication.
d
While the Caller ID Request is set to “Activate”, receiving a call from an unidentified number gives the
caller the Caller ID Request announcement (not the Public mode announcement).
1
On the standby screen X
w
(1 second or longer)
Public mode is set and “ ” appears.
When a call is received, the message saying “The person you are calling is currently
driving or in an area where cell phone should not be used. Please try again later.” is
sent to the caller.
■
To cancel Public mode (Driving mode)
Press
w
for 1 second or longer on the standby screen while Public mode is set.
Public mode is canceled and “ ” disappears from the screen.
Default setting On hold tone: Tone 1 Holding tone: Melody 1
On hold tone Sets the message given when a call is put on hold.
Tone 1 The following message is given in Japanese:
“I can’t answer the phone just now. Please wait for a few minutes or call again later.”
Tone 2 The following message is given in Japanese:
“I can’t answer the phone just now. Please call again later.”
Voice
announce 1
*
Plays the message recorded using “Voice announce”.
“Recording and Playing Alarm Tones and On Hold Tones”
→ p.412
Voice
announce 2
*
Holding tone Sets the hold tone given during a call.
Melody 1 “Fur Elise” is played.
Melody 2 “Mary Had A Little Lamb” is played.
Melody 3 “Symphony No.25 in G minor” is played.
Voice
announce 1
*
Plays the message recorded using “Voice announce”.
“Recording and Playing Alarm Tones and On Hold Tones”
→ p.412
Voice
announce 2
*
NOTE
e
You can check the selected message by pressing
o
(Play) on the message selection screen.
e
Even if you set “English” in “Select language”, the messages of “Tone 1” and “Tone 2” are given in Japanese.