Foma N902iX, Руководство пользователя

Страница: 54 / 574

52
Makin
g
/Receivin
g
Phone Calls
Cha
nging
V
o
ic
e Ca
ll to
V
id
e
op
hon
e Call
Changing Voice Call to Videophone Call
You can change the call mode during a voice call you dialed.
d
If the other party uses a FOMA terminal that can change the call mode, “ ” appears during a voice call
and you can switch the call mode between voice and videophone. (This function is available between
terminals that support change between voice call and videophone call.)
d
You can only change the call mode when you are the caller. When you are a callee, you cannot change the
call mode.
d
To change the call mode, the other party must set his or her terminal to show you “Ntfy switch-mode”
beforehand.
→ p.92
1
In-call screen X
d
( ) X “YES”
While a voice call is being changed to videophone call, the screen showing that the call mode is being
changed appears and the voice guidance is given.
Select “NO” on the “Ntfy switch-mode” message screen to return to the in-call screen.
NOTE
e
Call charges still apply while a call is on hold.
e Use “Set hold tone” to select the tone that sounds while a call is on hold.
e
A hold tone also sounds on your FOMA terminal while a call is on hold. However, the hold tone does not sound
when “Phone” in “Ring volume” is set to “Silent” or Manner mode is set. (The tone sounds if you have selected the
“Original” manner mode in which the “Phone vol.” setting is not “Silent”.)
NOTE
e You can repeatedly change the call mode between voice and videophone.
e
You can change a videophone call to a voice call. → p.85
e
It takes about 5 seconds to change a call. Signal quality may affect how long it takes.
e
You cannot change the call mode between videophone and voice while talking in the following cases:
a “Call Waiting” is running.
a
The other party is holding a call.
a
The other party has activated Record message.
e
The call time shown is reset to 0 second each time the call mode is changed. However, if a videophone call ends
after the call mode is changed, the call time shown indicates the total of the voice call and videophone call.
e
If you try to change the call mode, the message appears on the other party’s videophone screen asking to select an
image to send, camera image or substitute image.
→ p.65
e
If the call mode is changed, the first dialed number is registered to the Redial/Dialed calls record. The first received
number is registered to the Received calls record.
e
If the caller is using packet communication (including i-mode), the packet communication is canceled to change to
a videophone call.
e
If the other party is using packet communication (including i-mode), you receive the message “No switch” meaning
you cannot change the call mode. The voice call continues.
e
Depending on the other party’s communication conditions such as manipulation or the signal quality, you may not
be able to change the call mode and the call may be canceled.
e
You are not charged while “SWITCHING VIDEO/VOICE” appears.
e If you have changed the call mode, the call charge shown in “Call data” may differ from the one you will pay.
e
The hands-free operation is activated or deactivated according to the “Hands-free switch” setting when the call
mode is changed, regardless of the hands-free status before the change.
→ p.90
Ｖ．ｐｈｏｎｅ
Ｖ．ｐｈｏｎｅ
［Ｔａｌｋｉｎｇ］
１ｍ３０ｓ
１０ｓ ４ｓ
［通話中］
１ｍ３０ｓ ＹＥＳ
ＮＯ
Ｎｔｆy ｓｗｉｔｃｈ−ｍｏｄｅ
Ｃｈａｎｇｉｎｇ？
Ｖｉｄｅｏｐｈｏｎｅ
［Ｃｈａｎｇｉｎｇ］
The digital communication
fee is charged after the
appearance of this screen.
［Ｃｈａｎｇｉｎｇ］