Foma N902iX, Руководство пользователя

Страница: 202 / 574

200
* The miniSD memory card is optional for use in this terminal.
→
p.371
Camera
<Bar
c
o
d
e
re
ade
r>
Turning on the light
When it is not so bright (e.g. in a room), turning
on the light of a FOMA terminal brightens the
object.
c
If you do not shoot for 30 seconds or so after
turning on the light, it is automatically turned off.
1
Photo mode screen (p.187)/Contin-
uous mode screen (p.191)/Movie
mode screen (p.194)
X
a
( )
To turn off the light, press
a
( ).
Using the auto timer
Setting the auto timer allows you to shoot
images without holding a FOMA terminal (e.g.
to shoot people including yourself or to avoid the
camera shake).
c
The auto timer is available for Photo mode, Auto
Continuous mode and Movie mode. It is unavail-
able for Manual Continuous mode.
c
The auto timer is reset to “OFF” each time you
finish shooting.
c
The auto focus is available for Photo mode.
When shooting with AF lock, focus on the object
before setting the auto timer.
1
Photo mode screen
(p.187)/Continuous
mode screen (p.191)/
Movie mode screen
(p.194)
X
p
(FUNC)
X
“Auto timer”
X
“ON”
X
Enter a 2-digit number for
the auto timer
Enter a 2-digit number between “01” and “15” for
the auto timer.
Entering a 2-digit number automatically sets the
auto timer. To set the currently displayed number,
press
d
.
“10 seconds” is set at the time of purchase.
d
If the auto timer is set
The “ ” icon appears on the screen to show
that the auto timer is set.
Pressing
d
or
s
( ) sounds
the auto timer tone, and then the
auto timer starts running.
The incoming call lamp,
o
,
p
and “ ” flash.
The countdown tone sounds roughly five seconds
before the shooting. The incoming call lamp,
o
and
p
flash rapidly.
During the auto timer countdown, you can shoot
manually by pressing
d
or
s
( ).
■ To cancel the auto timer settings
X
p
(FUNC)
X
“Auto timer”
X
“OFF”
■
To stop the timer while it is running
X
o
(Quit) or
t
<Bar code reader>
Using the Bar Code
Reader
Using the rear camera allows a FOMA terminal
to scan JAN codes and QR codes. The data
scanned especially from QR codes can be used
for displaying/copying the text, using the func-
tions of Phone To/AV Phone To, Mail To, Web
To, i-
α
ppli To, or adding to bookmark/phone-
book. The FOMA terminal can also scan image
or melody data to play or save.
c
A FOMA terminal can save up to five scanned
data.
c Hold a FOMA terminal firmly so that it does not
shake during scanning.
c
When scanning a bar code, keep about 7 to 9cm
between the rear camera and the code.
■
JAN code and QR code
c
JAN code
JAN code is a series of vertical
lines (bars) with various widths
and spaces to represent
numbers. A FOMA terminal
can scan 8-digit (JAN8) and
13-digit (JAN13) bar codes.
* Scanning the JAN code above displays “4942857113068”.
NOTE
e
You cannot turn on the light when using the front
camera to record a voice without movies.
e This function is only supplementary. You cannot
always get enough light.
Light
０１〜１５？ １ ０
Ｓｈｕｔｔｅｒ ｄｅｌａｙ ｔｉｍｅ
Ｄｅｌａｙ ｔｉｍｅ（ｓｅｃｏｎｄｓ）
NOTE
e
Exiting the camera sets the auto timer to “OFF”.
Ｒｅｃｏｒｄ ＦＵＮＣ