11
Figure 9
Figure 10
Figure 11
Figure 9: Removal and refitting of glass
door assembly and burner assembly.
Figure 10 : Removal and refitting of the
decorative glass facia (see section 15.0)
Figure 11 : Visual check
for correct pilot flame.
denotes 4 off burner fixing points
WARNING: FAILURE TO POSITION
THE PARTS IN ACCORDANCE WITH
THESE DIAGRAMS OR FAILURE TO
USE ONLY PARTS SPECIFICALLY
APPROVED WITH THIS HEATER
MAY RESULT IN PROPERTY
DAMAGE OR PERSONAL INJURY.
As our policy is one of continuous improvement and development , we hope therefore you will understand we must retain the right to amend details and/or specifications without prior notice.
DO005562/00
27.0 POSITIONING OF FIELD REMOVABLE PARTS
M4 nyloc nut
Nylon washer
Retaining stud
M4 screw
