manualshive.com logo in svg

FlightSafety LEARJET 45, Руководство по подготовке пилотов, Страница: 462 / 539

Поделиться
Скачать
FlightSafety LEARJET 45 Скачать руководство пользователя страница 462

FLIGHT GUIDANCE AND

CONTROL SYSTEM

GENERAL

The Primus 1000 system includes an autopi-

lot, yaw damper and dual synchronized flight

directors. These functions are all co-located

in two IC-600 Display Guidance Computers

(DGCs) located in the nose avionics bay. Each

IC-600 houses a flight director; however,

only the copilot (right) IC-600 is connected

to the pitch, roll and yaw servos (Figure 16-

3) for the autopilot/yaw damper and rudder

boost functions.

A flight guidance controller (FGC)(Figure

16-46), located in the center of the glareshield

panel, provides the means of engaging the au-

topilot/yaw damper and controlling both flight

director (FD) systems. Lighting of this panel

is controlled through the pilot’s INSTR rheo-

stat. The S/I legends and green indicators are

dimmed through the NAV lights switch.

The autopilot is single channel with a fail pas-

sive design. The monitor system provides for

automatic disconnect in the event of a mal-

function in the flight director or the autopi-

lot/yaw damper. 

Both attitude heading reference systems

(AHRS) must be functioning for autopilot op-

eration and both avionics master switches

must be on.

The autopilot provides airplane control in re-

sponse to pitch and roll steering commands

from either flight director.

The yaw damper (YD) provides yaw rate

damping and turn coordination, but makes no

effort to control the flightpath of the airplane. 

L E A R J E T   4 5

P I L O T   T R A I N I N G   M A N U A L

16-78

FOR TRAINING PURPOSES ONLY

FlightSafety

international

Figure 16-46.   Flight Guidance Controller (FGC)

FD1

HDG

NAV

APP

BNK

AP

XFR

YD

SPD

FLC

VS

VNV

ALT

FD2

ASEL

SPD

PUSH IAS/M

HDG

PUSH SYNC

PUSH SYNC

PUSH SYNC

CRS 1

CRS 2

Honeywell

Содержание LEARJET 45




























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов