manualshive.com logo in svg

FlightSafety LEARJET 45, Руководство по подготовке пилотов, Страница: 309 / 539

Поделиться
Скачать
FlightSafety LEARJET 45 Скачать руководство пользователя страница 309

9.

If a leak in a main supply line to an en-

gine driven pump causes hydraulic sys-

tem fluid to be lost:
A. TRs can be operated with the auxil-

iary pump.

B. Flaps can be operated with the auxil-

iary pump if HYD XFLOW is selected

on.

C. The emergency brake accumulator

will have to be used for braking.

D. All of the above.

10. If the auxiliary hydraulic reservoir be-

comes excessively low:
A. An “AUX HYD QTY LO” CAS mes-

sage is displayed.

B. A “LOW” annunciation is displayed

on the HYD system schematic on the

EICAS/MFD displays.

C. The HYD XFLOW valve will auto-

matically close (if open).

D. All of the above.

L E A R J E T   4 5

P I L O T   T R A I N I N G   M A N U A L

13-13

FOR TRAINING PURPOSES ONLY

FlightSafety

international

Содержание LEARJET 45




























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов