manualshive.com logo in svg

FlightSafety LEARJET 45, Руководство по подготовке пилотов, Страница: 294 / 539

Поделиться
Скачать
FlightSafety LEARJET 45 Скачать руководство пользователя страница 294

7.

With failure of electrical power to both

channels of the CPC while airborne:
A. The controller reverts to manual

mode.

B. MANUAL PRESS must be selected

to enable manual control.

C. The cabin will depressurize.
D. The cabin will go to maximum dif-

ferential pressure (9.7 psid).

8.

What CAS annunciation should the crew

expect to see if MANUAL PRESS is se-

lected?
A. CABIN ALTITUDE (amber)
B. CABIN ALTITUDE (white)
C. CAB PRESS MAN (amber)
D. CAB PRESS MAN (white)

9.

At what cabin altitude will the passenger

oxygen masks automatically deploy?
A. 8,750 + 200 feet
B. 9,500 + 200 feet
C. 10,000 + 200 feet
D. 14,500 + 250 feet

10. The cabin pressurization system auto-

matically switches to manual mode when-

ever:
A. Dual ADC failure occurs.
B. MANUAL PRESS switch has been

depressed.

C. Left or right BLEED failure.
D. Cabin pressure controller channel fail-

ure (primary or secondary). 

11. After experiencing a dual generator fail-

ure inflight, the cabin pressurization sys-

tem:
A. Reverts to manual mode.
B. Is shut down and the emergency pres-

surization system is activated.

C. Is unaffected, as the cabin pressure

controller’s secondary channel is pow-

ered by the Emer Batt Bus.

D. Automatically opens both outflow

valves, regardless of the airplane al-

titude.

12-22

FOR TRAINING PURPOSES ONLY

L E A R J E T   4 5

P I L O T   T R A I N I N G   M A N U A L

FlightSafety

international

Содержание LEARJET 45




























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов