manualshive.com logo in svg

FlightSafety LEARJET 45, Руководство по подготовке пилотов, Страница: 175 / 539

Поделиться
Скачать
FlightSafety LEARJET 45 Скачать руководство пользователя страница 175

ENGINE/FUEL CONTROL

PANEL

The engine/fuel control panel is located toward

the aft end of the center pedestal (Figure 7-11).

The engine related controls on this panel in-

clude left and right engine start switches, ig-

nition switches and computer switches.

Located in the center of the panel is also an

EDS (engine diagnostic system) record button,

a three position engine sync switch and an

ARM switch for the APR (automatic perfor-

mance reserve). The panel also includes en-

gine fire indicator/FWSOV switches and

engine extinguisher armed switches.

The L and R ENG CMPTR switches are lever-

locking with three positions (ON, MAN,

OFF). The switches normally remain in the

ON position where they provide electrical

power to the DEECs for computer-on opera-

tion. When a computer switch is in the man-

ual (MAN) position electrical power is only

available to those circuits within the com-

puter that control the overspeed solenoid and

for fault monitoring.

THRUST LEVERS

Two thrust levers (Figure 7-12) are located in

a quadrant on the forward section of the cen-

ter pedestal. Thrust reverser levers are pig-

gyback mounted on the thrust levers. The

thrust levers operate in a somewhat conven-

tional manner except the throttle quadrant has

detents in the forward range. Each thrust lever

is connected to a rotary variable differential

transformer (RVDT). In the normal computer-

on mode of operation, PLA (power lever angle)

is transmitted to the DEECs through the

RVDTs.

The throttle quadrant has detents and labels

(Figure 7-12) at the following positions, start-

ing full forward at APR and moving aft:

• APR (automatic performance reserve)

• T/O (take-off thrust)

• MCT (maximum continuous thrust)

L E A R J E T   4 5

P I L O T   T R A I N I N G   M A N U A L

7-16

FOR TRAINING PURPOSES ONLY

FlightSafety

international

FUEL

L STBY

R STBY

XFLOW

FUEL USED RESET

ON

ARM

APR

EDS RECORD

ENG SYNC

N1

N2

OFF

L START

L IGN

OFF

ON

L ENG CMPTR

M
A
N

FIRE

#1

#2

EXTINGUISHER

L ENGINE

#2

#1

EXTINGUISHER

FIRE

R START

R IGN

OFF

ON

R ENG CMPTR

M
A
N

R ENGINE

ARMED

 FIRE
PUSH

CLOSED

 FIRE
PUSH

CLOSED

ON

ON

ON

ON

ON

ARMED

ARMED

ARMED

Figure 7-11.   Engine/Fuel Control Panel

Содержание LEARJET 45




























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов