manualshive.com logo in svg

FlightSafety LEARJET 45, Руководство по подготовке пилотов, Страница: 154 / 539

Поделиться
Скачать
FlightSafety LEARJET 45 Скачать руководство пользователя страница 154

1.

The APU is approved for use during

ground and flight operations.
A. True
B. False

2.

The APU can provide:
A. Electrical power and bleed air simul-

taneously.

B. Either electrical power or bleed air,

but not at the same time.

C. Electrical power only.
D. Bleed air only.

3.

The APU lubricating system holds ap-

proximately 

quarts of oil.

A. 1
B. 2
C. 3
D. 4

4.

The APU fuel consumption rate is ap-

proximately 

pounds per hour.

A. 50
B. 75
C. 100
D. 150

5.

The AFM limitation (field pressure alti-

tude) for APU operation is:
A. 5,000 ft.
B. 8,000 ft.
C. 10,000 ft.
D. 14,000 ft.

6.

The following switch configuration is re-

quired to check the APU oil level.
A. Cockpit APU Master Switch must be

on (only).

B. Right battery and cockpit APU Master

Switch must be on.

C. No cockpit switches need to be on.
D. Power is turned on at the Maintenance

Panel (tailcone).

6-12

FOR TRAINING PURPOSES ONLY

L E A R J E T   4 5

P I L O T   T R A I N I N G   M A N U A L

FlightSafety

international

REVIEW QUESTIONS

Содержание LEARJET 45




























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов