manualshive.com logo in svg

FlavorShot AC-FS5, Руководство по обслуживанию

Поделиться
Скачать
FlavorShot AC-FS5 Скачать руководство пользователя страница 55

 

55

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 

 
The following conditions are not covered by this Warranty: 
  

•

 Equipment failure related to improper installation, improper utility connection 

or supply, and problems due to ventilation. 
  

•

 Equipment that has not been properly maintained, calibration of controls, 

adjustments, damage from improper cleaning, and water damage to controls. 
  

•

  Equipment that has not been used in an appropriate manner, or has been 

subject to misuse or misapplication, neglect, abuse, accident, alteration, 
negligence, damage during transit, delivery or installation, fire, flood, riot, or act 
of God.  
  

•

 Equipment on which the model number or serial number has been removed or 

altered.   
 

If the equipment has been changed, altered, modified or repaired by other 

than a qualified service technician during or after the warranty period, then the 
manufacturer shall not be liable for any damages to any person or to any 
property, which may result from the use of the equipment thereafter. 
 

This Warranty does not cover services performed at overtime or premium 

labor rates.  Should service be required at times which normally involve overtime 
or premium labor rates, the owner shall be charged for the difference between 
normal service rates and such premium rates.  A. C. Dispensing Equipment Inc. 
does not assume any liability for extended delays in replacing or repairing any 
items beyond its control.   

In all cases, the use of other than A. C. Dispensing Equipment Inc. 

authorized OEM replacement parts will void this Warranty.   

This equipment in intended for commercial use only.  Warranty is void if 

equipment is installed in other than commercial applications.   

 
THE FOREGOING WARRANTY IS IN LIEU OF ANY AND ALL OTHER 

WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED 
WARRANTY OF MERCHANTABILITY OR FITNESS AND CONSTITUTES THE 
ENTIRE LIABILITY OF A. C. DISPENSING EQUIPMENT INC.  IN NO EVENT 
DOES THE LIMITED WARRANTY EXTEND BEYOND THE TERMS STATED 
HEREIN.   
 

A.C. Dispensing Equipment Inc. 

100 Dispensing Way 

Lower Sackville, Nova Scotia, B4C 4H2  Canada 

 

Technical Assistance Center: 1-888-777-9990 or 1-902-865-9602 

 

Printed:  02/11/05 
 
Please record: 

Model Number 

_________ 

 

  Serial 

Number _________ 

 

  Date 

of 

Purchase 

_________ 

 
 

Содержание AC-FS5

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды