FlavorShot AC-FS5, Руководство по обслуживанию

Страница: 52 / 56

52
5. For dispensers with adjustable legs, adjust legs
to level dispenser. Place a bubble level on top of the
dispenser to aid in the leveling process. Ensure that
the dispenser is level or slightly higher in the back.
Do not allow the dispenser to be tilted backwards.
Red warning light at
the top of the product
selection button is
flashing
NOTE: The flashing red light is a warning light to
indicate that the volume in the flavor tank is getting low
and the flavor will need to be refilled soon. A solid red
warning light indicates the product has run out and
must be refilled or replaced.
1. Open the dispenser door.
2. Replace or refill the flavor tank, following the
instructions on page 10.
3. Reset the tank level:
a. Close the dispenser door.
b. Press the Flavor selection button for the tank that
was filled.
c. Press the Reset button on the upper front door of
the dispenser.
The light should stop flashing or go out.
4. If the red light continues, call the A. C. Dispensing
Equipment Inc. Technical Assistance Center at
1-888-777-9990 or 1-902-865-9602.
LCD Display on the
front door does not
come on
Check to make sure that the pumps are operating. If
so, the LCD may be faulty. If the pumps don’t function,
and the LCD Display is not on, the circuit breaker may
have tripped out and may need to be reset.
To Reset the circuit breaker:
1. Turn the power switch OFF.
2. Check the circuit breaker.
- Locate the Circuit Breaker on the lower left side
of the dispenser.
- Gently push the Circuit Breaker in once to reset
it: push in at the top of the breaker until no white
is showing.
3. Turn the power switch ON.
4. If the LCD Display does not come on now, call
the A. C. Dispensing Equipment Inc. Technical
Assistance Center at 1-888-777-9990 or 1-902-865-
9602.