FlavorShot AC-FS5, Руководство по обслуживанию

Страница: 13 / 56

13
Drink Count Data:
The FlavorShot by SureShot™ dispenser provides Drink Count Data. This
shows the number of drinks dispensed since that flavor was last reset.
To check Drink Count Data for flavored coffee:
1. Press Prime button and hold for 2 seconds. Release the prime button.
2. Press Clean button and hold for 2 seconds.
3. Press the Flavor button for the flavor you want the Drink Count Data on, e.g.
French Vanilla.
4. The LCD window will display the total number of those drinks dispensed.
5. To Exit: a. Press the
Prime Button and hold for 2 seconds.
b. Press the Clean Button and hold for 2 seconds.
To check Drink Count Data for a specialized coffee , e.g. French Vanilla Iced
Coffee:
1. Press Prime button and hold for 2 seconds. Release the prime button.
2. Press Clean button and hold for 2 seconds.
3. Press the Flavor button for the flavor you want the Drink Count Data on, e.g.
French Vanilla.
4. Press the
Modifier button for the specialty drink you want the Drink Count
Data on, e.g. Iced Coffee.
5. The LCD window will display the total number of those drinks dispensed.
6. To Exit: a. Press the
Prime Button and hold for 2 seconds.
b. Press the Clean Button and hold for 2 seconds.
To Reset Drink Count Data:
1. Press Prime button and hold for 2 seconds. Release the prime button.
2. Press Clean button and hold for 2 seconds.
3. Press Flavor OR Modifier buttons
4. Press Rese t button to reset drink count for that drink combination
5. To Exit: a. Press the Prime Button and hold for 2 seconds.
b. Press the Clean Button and hold for 2 seconds.
TO DISABLE BUTTON PANEL
Disabling the Button Panel deactivates all the buttons and will not allow
flavor to be dispensed. The Button Panel may be disabled to allow cleaning of
the dispenser front without loss of flavors and to allow reprogramming of the
dispenser.
To Disable Button Panel:
1. Press and hold the
Reset button, without selecting a Flavor.
The LCD will display “Panel Disabled” . All the red LEDs on the panel
buttons will flash. During that flashing, you may clean the dispenser front (see
page 16) or use the Infrared Programming Device to reprogram the
dispenser (see page 21).
NOTE: The “Panel Disabled” mode will last for 20 seconds before the dispenser
automatically returns to normal operating conditions and displays “Select Flavor”.