Flavor Burst FB 80M Series, Руководство пользователя

Страница: 67 / 84

65
NOTE: YOUR HANDS SHOULD BE CLEANED
AND SANITIZED BEFORE YOU PERFORM
THE FOLLOWING PROCEDURES.
Keypad Functions
Figure 187
OFF: This key stops the Keypad function in
progress, such as the PUMP FLUSH and
ROTOR FLUSH functions. It also deselects all
of the numbered keys that have been selected.
#1-8: Press the key(s) #1-8 to select the
desired flavor(s) or syrup line and syrup pump.
Each numbered key corresponds to a particular
syrup pump, line, and tray. The trays inside the
cabinet are numbered accordingly so that the
operator knows which number operates which
flavor. These numbers are used in selecting
flavor(s) for each product drawn and also for
selecting a particular pump or syrup line for
functions such as the MANUAL PRIME PUMP,
PUMP FLUSH and ACCESS COUNT
READOUT. Once the product is done being
drawn or once the function for selected
pump/syrup line has finished, the key
automatically becomes deselected.
ROTOR FLUSH: Press and release to run
sanitizer solution through the Injector Head. It
is used to sanitize the Injector Head and
dispensing spout and also to purge the area
from any remaining product. ROTOR FLUSH
runs for approximately 5 seconds before
automatically shutting off. Be sure a container
is placed under the Injector Head to catch the
sanitizer solution.
PUMP FLUSH: After selecting a particular
pump (by pressing a key #1-8), press and
release this key to activate that particular syrup
pump. If the Syrup Bag Connector for that
particular pump is connected to a syrup bag,
this function is used to prime that particular
syrup pump and syrup line. If the Syrup Bag
Connector is connected to the Pump Flush
Adapter, then this function is used to clean and
sanitize the syrup line. Both functions for this
key are used in installing a new flavor and
performing the Clean-In-Place process.
Sanitizing the syrup line is also used when
winterizing the unit.
This function will run for approximately 15
minutes before automatically shutting off. The
OFF key may be pressed to cease the function
before then. Be sure a container is placed
under the Injector Head to catch the syrup.
MANUAL PRIME PUMP: This key has the
same function as the PUMP FLUSH key,
although it does not remain active after they key
has been released. Press and hold this key to
activate the PUMP FLUSH function, and
release the button when you wish the action to
stop.
PRE-PRIME PUMP:
This key is inoperative
and serves no function.
INCREASE/DECREASE: Press either key to
manually increase or decrease the amount of
flavoring that is dispensed in drawing product.
These keys are also used to create wider or
thinner layers between flavors when drawing a
serving using the multi-flavoring. See
‘Dispensing Flavor Burst Product’ for
instructions on adjusting those levels.
KEYPAD OPERATONS