Flavor Burst FB 80M Series, Руководство пользователя

Страница: 54 / 84

52
7. Adjust the angle of the Keypad by loosening
the bottom hand knob of the bracket and
swinging the keypad upward. The Keypad
hinges on the upper hand knob. Tighten the
knob to secure the Bracket. (See
Figure 130.)
Figure 130
Syrup Line Unit Connection
The syrup lines attached at the lower back of
the cabinet connect the 8 bags of syrup to the
Injector Assembly, with the 9
th
tube connecting
the Sanitizer Tank to the Injector Assembly.
1. Remove the small screw on the back panel
of the Cabinet and remove the panel. (See
Figure 131.)
Figure 131
2. Locate the 9-Tube Lead. Remove the dust
cap and slide the coupler casing down.
(See Figure 132.)
Figure 132
3. Loosen the Lead’s coupler nut and slide the
connection onto the Cabinet slot. (See
Figure 133.)
Figure 133
4. Tighten the coupler nut and the casing to
secure. (See Figure 134.)
Figure 134
5. Align the 9-hole gasket with the coupler pins
of the 9-Tube Lead and place the gasket
against the coupler. Then align the coupler
pins of the two syrup lines and connect the
assemblies. (See Figure 135.)
Figure 135