Flavor Burst FB 80M Series, Руководство пользователя

Страница: 58 / 84

56
1. Determine which side of the freezer the
Injector Assembly will be mounted on. The
Mounting Bracket should be installed to the
outside of the Gear Box Assembly. (See
Figure 151.)
26047
Figure 151
2. Assemble the Mounting Bracket and install
it onto the Gear Box on the side closest to
the operator. Ensure all parts are
assembled in the proper position. (See
Figure 152.)
26080
Figure 152
NOTE: THE PLASTIC WASHER SHOULD
ALWAYS BE BETWEEN THE BRACKET
KNOB AND THE UPPER BRACKET.
NOTE: THE UPPER BRACKET SHOULD
ALWAYS BE INSTALLED TO THE OUTSIDE
OF THE BRACKET BASE.
NOTE: THE SPRING WASHER SHOULD BE
BETWEEN THE UPPER BRACKET AND THE
BRACKET BASE.
NOTE: THE BRACKET THUMB SCREW
SHOULD ALWAYS BE INSERTED THROUGH
THE UPPER BRACKET FIRST AND THEN
SCREWED INTO THE BRACKET BASE,
PLACING IT ON THE OUTSIDE OF THE
BRACKET ASSEMBLY.
NOTE: THE HOOK OF THE UPPER
BRACKET CAN BE FACING EITHER
DIRECTION ACCORDING TO PREFERENCE.
(See Figure 153.)
Figure 153
3. Hang the Mounting Bracket on the lower
door post and install the Injector Assembly
on the preferred side of the freezer. Install
the Injector Head locking ring fully over the
Freezer Spout Adapter so that the locking
collar covers the tabs on the Adapter and
rotate the locking collar to secure. (See
Figure 154.)
26042
Figure 154
4. Use the Gear Box thumb nut to adjust the
Mounting Bracket horizontally so that it
hangs straight down from the door nut.
(See Figure 155.)
26085
Figure 155