Flavor Burst FB 80M Series, Руководство пользователя

Страница: 61 / 84

59
5. Mount the Bracket to the cleaned area on
the freezer and press firmly to secure. (See
Figure 165.)
Figure 165
6. The 9-Tube Assembly slides into the
smaller slot on the Bracket so that the
coupler casing is above the bracket and the
syrup tubes hang below. (See Figure 166.)
26187
Figure 166
7. The Drive Motor hangs upside down in the
larger slot, so that the heads of the
mounting screws slide above the Bracket,
and the rest of the Motor hangs below it.
(See Figure 167.)
26186
Figure 167
Remote Microprocessor Module Connection
and Power Up
The electrical connections for the FB 80M are
located on the Remote Microprocessor Module.
The Module can be placed according to
preference with the 6’ extension cord attached
to the lower back of the cabinet. Once
connected to the Cabinet and turned on, the
Microprocessor Module can remain on during
normal operations. It does not need to be
turned off unless it is serviced or moved, or
unless it is not used for a long period of time.
ELECTRICAL HAZARD: DO NOT
HANDLE OR OPERATE IN PRESENCE OF
WATER. FAILURE TO COMPLY MAY
RESULT IN SERIOUS ELECTRICAL SHOCK
OR ELECTROCUTION.
1. Ensure the power-switch is in the “off”
position. Connect the Rotor Cable and the
Keypad Cable to the appropriate fitments
labeled on the Module. (See Figure 168.)
Figure 168
2. Tighten the 4 strain-relief screws with a
flathead screwdriver. (See Figure 169.)
Figure 169