Flavor Burst FB 80M Series, Руководство пользователя

Страница: 71 / 84

69
6. TOO LIGHT: If the serving appears to have
stripes that are narrow and light pastel in
color, increase the syrup flow by:
(Method A )
touching the INCREASE key, or
(Method B )
decreasing the flow of soft-
serve by rotating the adjustment knob
clockwise (tighten the screw).
NOTE:
WHEN AN ADJUSTMENT IS MADE
FOR ONE FLAVOR, ALL OTHER FLAVORS
ARE ADJUSTED AUTOMATICALLY TILL THE
OPERATOR SELECTS A DIFFERENT LEVEL.
Adjusting Multi-Flavored Timing
When using the multi-flavored function (i.e.
when more than one flavor is selected for a
single serving), the timing of the changes
between flavors can be adjusted using the
Keypad. This would be used if the operator
desired either wider or narrower layers of
flavors in the serving.
Ensure that the freezer is set to the desired
product flow rate according to the freezer
manufacturer’s instructions.
1. Touch and hold the MANUAL PRIME PUMP
key on the Keypad until the ‘Syrup Output’
bar graph flashes. (Approximately 5
seconds.)
2. Adjust the level indicated on the flashing bar
graph by touching the INCREASE key or
DECREASE key. A lower setting will
change flavors more frequently in a multi-
flavor dispense (thinner layers). A higher
setting will change flavors less frequently in
a multi-flavor dispense (wider layers).
(See Figure 200.)
Figure 200
3. Touch and release the MANUAL PRIME
PUMP key on the Keypad to store any
changes in memory and return to normal
operating mode.
4. Select the multiple flavors by touching the
keys (1-8) and draw a serving from the
freezer according to instructions. (See
Figure 201.)
26210
Figure 201
5. Determine if the serving needs thinner or
thicker layers of flavor. This is largely a
matter of personal preference and, if
desirable, you may repeat steps 1-4 until
the desired effect is achieved. (See
Figure 202.)
Figure 202
NOTE: IT IS POSSIBLE THAT THE LOWEST
SETTING MAY BLEND FLAVORS WITHOUT A
DISTINCT LAYERING EFFECT.