Flavor Burst FB 80M Series, Руководство пользователя

Страница: 39 / 84

37
CIP - Phase 3: Reassembly
24. Attach a Syrup Bag Adapter to each bag
fitment. The notch of the black collar must
settle into one of the grooves on the fitment
in order to secure the connection. (See
Figure 77.)
NOTCH MUST
SETTLE INTO
GROOVE
26077
Figure 77
25. Turn the adapter valve toward the syrup line
while holding the adapter base. Syrup lines
may be installed in any position as long as
the syrup tubes are not pinched. (See
Figure 78.)
26277
Figure 78
26. Reconnect the Syrup Bag Connectors to the
Syrup Bag Adapters. (See Figure 79.)
26275
Figure 79
27. Remove the Syrup Line Manifold, the
Duckbill Check Valve, and Coupler Body
from the sanitizer solution and place in the
drain tray to air dry. (See Figure 80.)
26091
Figure 80
28. Install the Duckbill Check Valve into the
Syrup Line Manifold and the Syrup Line
Manifold into the Coupler Body. (See
Figure 81.)
26176
Figure 81
29. Remove the end of the 9-Tube Assembly
from the container. Using a spray bottle of
McD Sanitizer (HCS) , spray the end of the
assembly and allow it to sanitize for at least
5 minutes. (See Figure 82.)
Figure 82