Flavor Burst FB 80INT-08, Руководство пользователя

Страница: 65 / 85

64
11. Attach the Syrup Bag Adapter to the bag
fitment. The notch of the black collar must
settle into one of the grooves on the fitment
in order to secure the connection. (See
Figure 185.)
NOTCH MUST
SETTLE INTO
GROOVE
26077
Figure 185
12. Turn the adapter valve toward the syrup line
while holding the adapter base. Syrup
lines may be installed in any position as
long as the syrup tubes are not pinched.
(See Figure 186.)
26277
Figure 186
13. Connect the Syrup Bag Connector to the
Syrup Bag Adapter. (See Figure 187.)
26275
Figure 187
14. Select and touch the number of the new
syrup flavor to prime that pump.
15. Place a container under the Injector Head to
catch sanitizer solution and/or fresh product
to be dispensed and press WATER /
SYRUP FLUSH to prime the syrup line.
(See Figure 188.)
26251
Figure 188
16. Once syrup flows consistently from the
Injector Head, press CANCEL ENTRY.
NOTE: THE PUMP FLUSH FUNCTION WILL
AUTOMATICALLY SHUT OFF AFTER 15
MINUTES.
NOTE: YOU MAY WANT TO PROCEED WITH
STEP 17 AS TIME ALLOWS DURING THE
PUMP FLUSH FUNCTION IF AN ADDITIONAL
FLAVOR NEEDS TO BE INSTALLED.
17. Repeat Steps 3-16 for each additional flavor
until all flavors have been installed and
primed.
18. After all flavors have been installed and
lines primed, press the WATER / SYRUP
FLUSH key to clean the Injector Head.
(See Figure 189.)
26250
Figure 189