Flavor Burst FB 80INT-08, Руководство пользователя

Страница: 64 / 85

63
4. Lifting up with the bag fitment, press the
center pin of the bag fitment valve and
gently press on the bag to release any
excess air. (See Figure 179.)
Figure 179
5. Select a numbered tray to correspond with
the flavor you have chosen.
6. Place the tray up-side-down over the bag
and pull the fitment into the tray opening as
shown. The tray opening should slide
between the grooves of the bag fitment.
(See Figure 180.)
Figure 180
7. Holding the fitment in place, raise the open
end of the tray and flip the tray right side up.
As the tray is set back down, allow the bag
to settle in the tray. (See Figure 181.)
Figure 181
8. Make sure the syrup bag is settled neatly
into the tray, and then install the loaded tray
into the cabinet. (See Figure 182.)
26196
Figure 182
9. Clean the outer surfaces of the Syrup Bag
Connector with detergent water, single
service towel and brush if necessary. Then
rinse and dry the connector using clean
water and single service towels. (See
Figure 183.)
Detergent
CLEAN
Water
RINSE
DRY
26276
Figure 183
10. Using a spray bottle of approved sanitizer
solution, spray the syrup bag fitment and
the Syrup Bag Connector. Allow these
parts to sanitize for at least 1 minute. (See
Figure 184.)
26271
Figure 184