Flavor Burst FB 80INT-08, Руководство пользователя

Страница: 5 / 85

4
INTRODUCTION
Congratulations on your purchase of an
FB 80INT series flavoring system! As a food
and beverage provider, your customers are
your greatest asset. Your primary concern
must be the health and welfare of your
customers. This manual provides everyday
operating guidelines and procedures. Special
functions have been incorporated into the
equipment to provide simple and effective
cleaning and sanitizing of your unit. We urge
you to follow these instructions carefully and
maintain strict sanitary practices in your daily
operating routine.
The FB 80INT system is an add-on to a soft
serve freezer designed to inject concentrated
flavorings throughout soft serve product as it is
dispensed. To dispense a flavored product, the
operator first selects the flavor(s) from the
system keypad. The draw-handle must then be
moved into the open position while depressing
the lever on the spigot switch in a smooth
continuous motion to activate the FB 80INT
system and dispense flavored product.
Returning the draw-handle to a closed position
and releasing the draw handle switch will stop
product flow and the FB 80INT system.
Flavor Burst
®
syrup is stored within the
equipment cabinet in 1 gallon disposable bags.
Proper syrup injection rate is maintained by
adjusting the flavor level on the system keypad.
The cabinet is installed in a Taylor C201 mobile
cabinet with a modified back panel that
streamlines the system with the freezer and
optimizes the space within.
Components of the FB 80INT system should be
cleaned daily to ensure the highest standard of
sanitation. When your equipment is delivered
or if it has been unused for more than 24 hours,
follow the DAILY OPENING PROCEDURES.
Always follow these safety precautions when
operating the Flavor Burst
®
system:
DO NOT operate the system without
reading this operator’s manual. Failure to follow
this instruction may result in equipment
damage, poor system performance, health
hazards, or personal injury.
DO NOT operate the system unless it is
properly grounded. Failure to follow this
instruction may result in electrocution.
DO NOT operate the system with larger
fuses than specified on the system data label.
Failure to follow this instruction may result in
electrocution or damage to the machine.
Consult your electrician.
DO NOT put objects or fingers in the
door spout. Failure to follow this instruction may
result in contaminated product or personal
injury from blade contact.
DO NOT install the unit in an area where
a water jet could be used, and do not use a
water jet to clean or rinse the system. Failure to
follow these instructions may result in serious
electrical shock.
NOISE LEVEL: Airborne noise emission does
not exceed 70 dB(A) when measured at a
distance of 1.0 meter from the surface of the
machine and at a height of 1.6 meters from the
floor.
NOTE: Operations Manual subject to
change. Contact your local distributor for most
recent updates concerning the FB 80INT unit.
SAFETY PRECAUTIONS