Flavor Burst FB 80INT-08, Руководство пользователя

Страница: 33 / 85

32
12. Attach the Syrup Bag Adapter to the bag
fitment. The notch of the black collar must
settle into one of the grooves on the fitment
in order to secure the connection. (See
Figure 49.)
NOTCH MUST
SETTLE INTO
GROOVE
26077
Figure 49
13. Turn the adapter valve toward the syrup line
while holding the adapter base. Syrup
lines may be installed in any position as
long as the syrup tubes are not pinched.
(See Figure 50.)
26277
Figure 50
14. Connect the Syrup Bag Connector to the
Syrup Bag Adapter. (See Figure 51.)
26275
Figure 51
15. Select and touch the number corresponding
with the new syrup flavor to prime the pump.
16. Place a container under the Injector Head to
catch residual sanitizer solution and/or fresh
product to be dispensed and press WATER
/ SYRUP FLUSH to prime the syrup line.
(See Figure 52.)
26251
Figure 52
17. Once syrup flows consistently from the
Injector Head, press CANCEL ENTRY to
complete the procedure.
NOTE: THE PUMP FLUSH FUNCTION WILL
AUTOMATICALLY SHUT OFF AFTER 15
MINUTES.
NOTE: YOU MAY WANT TO PROCEED WITH
STEP 18 AS TIME ALLOWS DURING THE
PUMP FLUSH FUNCTION IF AN ADDITIONAL
FLAVOR NEEDS TO BE INSTALLED.
18. Repeat this entire process for each
additional flavor to be installed.
19. When no additional flavors need to be
installed, press the WATER / SYRUP
FLUSH key to clean the Injector Head.
(See Figure 53.)
26250
Figure 53